PalletRackFinderBeta

Wire Decking Suppliers in Oklahoma — 2 Companies

Wire decking is the mesh panel that sits on pallet rack beams, giving pallets a stable surface and — more importantly — letting fire sprinkler water pass through to the levels below. It's not glamorous, but it's required by fire code in most jurisdictions, and it prevents the kind of pallet fall-through incidents that send people to the hospital. Oklahoma City and Tulsa serve as distribution hubs for the Southern Plains. The state's central location on I-35 and I-40 provides good truck access to Texas, Kansas, and the broader Midwest. Oil and gas industry supply chain operations are a significant part of the industrial storage market.

Learn more about wire decking in Oklahoma

Wire Decking by State

Wire Decking Suppliers in Oklahoma (2)

Nearby Wire Decking Suppliers

These companies serve areas near Oklahoma.

When to Choose Wire Decking

  • Your fire marshal requires it (most do for rack over 12 feet)
  • Pallets are inconsistent sizes or have damaged bottom boards
  • You store non-palletized items directly on the beams
  • OSHA or your insurance carrier requires a positive stop for stored loads
  • You're building out new rack and want to meet code from the start

Key Specs to Ask About

  • Deck size (must match beam span and depth — typically 42"x46" or 42"x52")
  • Wire gauge (heavier gauge = higher capacity, typically 14-6 gauge)
  • Capacity rating (usually 2,000-3,000 lbs UDL per deck)
  • Waterfall edge vs. flared channel (determines how it seats on the beam)
  • Number of support channels (crossbars underneath — more = higher capacity)
  • Galvanized vs. powder-coated finish
Seismic Zone

Oklahoma requires seismic engineering for wire decking installations. All rack must resist lateral seismic forces per ASCE 7 and local building code. Budget for heavier baseplates, larger anchor bolts, and stamped engineering.

How It Compares

FactorWire Decking
Fire code complianceYes — allows sprinkler water to pass through
Pallet supportProvides solid surface for damaged or undersized pallets
Typical capacity2,000-3,500 lbs UDL per deck
InstallationDrop-in — no tools required for waterfall style
AlternativesPlywood (blocked by most fire codes), bare beams (risk of pallet fall-through)

Wire decking isn't really competing against an alternative — it's a near-universal accessory for pallet rack. The question is whether you install it now or wait for the fire marshal to tell you to.

Did you know?

Oklahoma went from 2 earthquakes per year to over 900 between 2009 and 2015, making it temporarily more seismically active than California. Most of the earthquakes are linked to oil and gas wastewater injection. Rack systems installed before 2009 weren't engineered for this — a lot of warehouses are playing catch-up.

Frequently Asked Questions

Is wire decking required by code?
It depends on your jurisdiction, but in most cases — yes. NFPA 13 (the fire sprinkler standard) and IFC/IBC building codes require that rack storage allow sprinkler water to penetrate through shelving to reach lower levels. Wire mesh does this; solid shelves don't. Your fire marshal will tell you whether it's required in your facility.
What's the difference between waterfall and flared channel wire decking?
Waterfall decking has bent edges that drape over the front and rear beams — it's the most common type and drops in without tools. Flared channel decking has welded channel supports that sit inside the beam step, creating a flush surface. Waterfall is easier to install and remove; flared channel is more stable under heavy or uneven loads.
How much weight can wire decking hold?
Standard decks range from 2,000-2,500 lbs uniformly distributed load (UDL). Heavy-duty options go up to 3,500+ lbs. UDL assumes the weight is spread evenly across the deck surface. If you're placing concentrated point loads (like a single heavy item in the center), the effective capacity is lower. Check the manufacturer's derating chart.
How many wire decking suppliers are in Oklahoma?
We currently list 2 companies offering wire decking in Oklahoma. This number grows as we expand our directory. Nearby states may have additional options.
Does wire decking in Oklahoma require seismic engineering?
Yes. Oklahoma is in a seismic zone, so all rack installations — including wire decking — must be seismically engineered per ASCE 7 and local building code. This means heavier baseplates, larger anchor bolts, and stamped engineering drawings. Budget 15-25% more for the seismic components.
Did you know?

A single fire sprinkler head can dump 25 gallons of water per minute. Without wire decking, your top rack level becomes a swimming pool and the sprinkler can't reach the fire below.

Coverage Map

Wire Decking in Nearby States

Related Services

Need help with your project?

Tell us what you’re looking for and we’ll route your request to qualified companies. Free, no commitment.

Get Quotes

Are you a racking company?

Get listed in the directory and start receiving qualified leads.

List Your Company