PalletRackFinderBeta

Wire Decking Suppliers in Nebraska — 3 Companies

Wire decking is the mesh panel that sits on pallet rack beams, giving pallets a stable surface and — more importantly — letting fire sprinkler water pass through to the levels below. It's not glamorous, but it's required by fire code in most jurisdictions, and it prevents the kind of pallet fall-through incidents that send people to the hospital. Omaha and Lincoln anchor Nebraska's warehouse market. The state's central location on I-80 (the main east-west interstate) makes it a natural midpoint for cross-country distribution. Agriculture and food processing (beef, especially) drive significant cold storage demand.

Learn more about wire decking in Nebraska ↓

Wire Decking by State

ILINIAKSMIMNMONENDOHSDWI

Wire Decking Suppliers in Nebraska (3)

RMH Systems

Supplier·Bellevue, NE

RMH Systems is the largest Midwest material handling distributor with 80+ years of experience and multiple locations across Iowa and Illinois.

Selective Pallet RackDrive-In RackCantilever RackMezzanineShelvingWire Decking

Lift Solutions Inc

Supplier·Omaha, NE

Lift Solutions is a Steel King Excalibur dealer with locations in Nebraska Colorado Kansas and Iowa providing warehouse storage solutions.

Selective Pallet RackShelvingMezzanineWire Decking

Dakota Storage Products

Supplier·West Fargo, ND

Buys and sells new and used pallet racking with design, installation, and teardown services. Serves ND, SD, MN, MT, and WY with professionally trained installation crews.

Selective Pallet RackCantilever RackShelvingWire Decking

When to Choose Wire Decking

  • ✓Your fire marshal requires it (most do for rack over 12 feet)
  • ✓Pallets are inconsistent sizes or have damaged bottom boards
  • ✓You store non-palletized items directly on the beams
  • ✓OSHA or your insurance carrier requires a positive stop for stored loads
  • ✓You're building out new rack and want to meet code from the start

Key Specs to Ask About

  • •Deck size (must match beam span and depth — typically 42"x46" or 42"x52")
  • •Wire gauge (heavier gauge = higher capacity, typically 14-6 gauge)
  • •Capacity rating (usually 2,000-3,000 lbs UDL per deck)
  • •Waterfall edge vs. flared channel (determines how it seats on the beam)
  • •Number of support channels (crossbars underneath — more = higher capacity)
  • •Galvanized vs. powder-coated finish

How It Compares

FactorWire Decking
Fire code complianceYes — allows sprinkler water to pass through
Pallet supportProvides solid surface for damaged or undersized pallets
Typical capacity2,000-3,500 lbs UDL per deck
InstallationDrop-in — no tools required for waterfall style
AlternativesPlywood (blocked by most fire codes), bare beams (risk of pallet fall-through)

Wire decking isn't really competing against an alternative — it's a near-universal accessory for pallet rack. The question is whether you install it now or wait for the fire marshal to tell you to.

Did you know?

Omaha is home to five Fortune 500 companies, including Berkshire Hathaway. Warren Buffett runs one of the world's largest conglomerates from the same city where Union Pacific's railroad dispatchers still route freight trains across the continent. Old money, old rails, new warehouses.

Frequently Asked Questions

Is wire decking required by code?
It depends on your jurisdiction, but in most cases — yes. NFPA 13 (the fire sprinkler standard) and IFC/IBC building codes require that rack storage allow sprinkler water to penetrate through shelving to reach lower levels. Wire mesh does this; solid shelves don't. Your fire marshal will tell you whether it's required in your facility.
What's the difference between waterfall and flared channel wire decking?
Waterfall decking has bent edges that drape over the front and rear beams — it's the most common type and drops in without tools. Flared channel decking has welded channel supports that sit inside the beam step, creating a flush surface. Waterfall is easier to install and remove; flared channel is more stable under heavy or uneven loads.
How much weight can wire decking hold?
Standard decks range from 2,000-2,500 lbs uniformly distributed load (UDL). Heavy-duty options go up to 3,500+ lbs. UDL assumes the weight is spread evenly across the deck surface. If you're placing concentrated point loads (like a single heavy item in the center), the effective capacity is lower. Check the manufacturer's derating chart.
How many wire decking suppliers are in Nebraska?
We currently list 3 companies offering wire decking in Nebraska. This number grows as we expand our directory. Nearby states may have additional options.
Did you know?

A single fire sprinkler head can dump 25 gallons of water per minute. Without wire decking, your top rack level becomes a swimming pool and the sprinkler can't reach the fire below.

Coverage Map

Wire Decking in Nearby States

South DakotaIowaMissouriKansasColoradoWyoming

Related Services

InstallationRack Inspection

Need help with your project?

Tell us what you’re looking for and we’ll route your request to qualified companies. Free, no commitment.

Get Quotes

Are you a racking company?

Get listed in the directory and start receiving qualified leads.

List Your Company